產品介紹 點火器是專為氣體焊接、切割及加熱作業而設計。它是由燃氣助燃裝置、流量減壓裝置、氣體控制系統、點火源組成。其主要功能是在焊割作業間斷時將焊割炬掛在點火器的支架/掛鉤上即可關閉工作氣源，當需要恢復作業時，提取焊割炬氣源自動接通，此時只要將焊割炬火口靠近點火器火源即可實現點火(點火源5-8秒自動熄滅）。因此，使用本點火器不但節能，降低焊割炬的無效燃燒時間，減少由焊接產生有害污染物質 （電焊塵、氮氧化物、一氧化碳、乙炔等），而且使焊割作業更方便、安全，同時也可提高工作效率。 使用行業 燈飾照明、制冷(空調冰箱）、管路件焊接、發熱管、電熱管、水暖衛浴、五金加工、醫療器械、礦山、蓄電池、自行車、汽車水箱、玻璃等行業大量應用到的氧焊(風焊/氣焊/釬焊/銅焊/銀銅焊)工藝 EN06氧焊節能快速點火器主要技術參數 1．使用壓力范圍0-1.0Mpa 2．使用氣體：氧氣、乙炔、丙烷、煤氣、瓦斯（丁烷）等氣體。 3．節約用氣：30%-50% 4．型式：機械式/萬用電控式 5．點火方式：間斷電弧/常明火 6．節能器工作溫度-5℃—80℃ 7．電壓：AC220V/AC12V/DC1.5 電話：0757-28626789 Description A practical add on to your gas welding equipment(gas economiser) . For Oxygen/Acetylene torch systems/handles only.Heres how it works: A double shutoff valve with a pilot flame or a spark ignite.designed for quick shut-shut off and easy restart of your working torch flame. The torch flame is automatically extinguished and the gas flow discontinued by place your torch handle on the conveniently located hanger hook. To reignite the working flame, lift torch handle from the hook and place the tip close to the pilot flame. The gas saver allows you to safely set your torch down while adjusting your panels, quickly re-light without having to readjust your torch. bracket kit for welding table or cart mounting. Save additionally up to 30% of your normal tank consumption by installing today! 1.Surely and easily ignition by spark igniter. 2.Oxygen and combustible gas can be turned on or off firmly. 3.When the torch falls off from the hanger,gas will stop automatically.