l         Automatic bench locking screw machine instal the XY axis on the desktop , promoting the screwdriver by hand in order to achieve the scope of the table to move freely. Move down the screw driver and locking screw after the screwdriver aim at the location and finish the work of lock screws.

工作臺式自動鎖螺絲機是在工作臺面上加裝x-y軸，用手推動電批以實現在臺面范圍 的自由移動。當電批對準位置后向下移動即完成鎖螺絲的工作。

l         The x, y and z-axis of this machine use the linear bearing structures , the movement is easy

本機的x、y和z軸均采用直線軸承結構，運動輕松自如。

l         Screw supply system use the mechanical pars with low noise, low power, fast smooth feeding.                         供螺絲系統采用機械式選料，低噪聲、低耗能，供料平穩快捷。

l         The parts put on the desktop directly, use of a pre-board, to aim at position automatically.                                   工件直接放在工作臺上，利用預先做好的治具板，自動定位。

l         When the lock screw, as long as the pins will be at the hole of governing board and push down the screwdriver continuously, and finish all the work of locking screws

鎖螺絲時，只要將定位銷對準治具板孔連續下按，即可完成全部鎖螺絲工作

l         Particularly suited to the same specifications, multiple screw work pieces                                特別適合于同一規格、多顆螺絲 工件。